AM 400/x01 - AMC Graphics Adaptor with Mass Storage Option
The AM 400/x01 is a single-width full height graphics adaptor. The on-board Silicon Motion™ SM722 3D/2D dual display controller manages the graphics processing. The adaptor supports digital flat panel (DFP) displays and CRT monitors with an RGB interface up to 1280 x 1024, both via a single front panel DVI-I connector. These interfaces can be driven simultaneously with the same or different images. For extra functionality, a Serial ATA or Serial Attached SCSI disk drive is also supported. Market applications are varied, but include the industrial, control, defense and medical sectors.
Features
- Single-width, full-height AdvancedMC™ module:
- compliant to AMC.0 - option for mid-height AMC
module
- compliant to AMC.0 - option for mid-height AMC
module
- High performance 3D/2D dual display controller:
- 8 Mbytes of internal DRAM
- maximum resolution 1280 x 1024
- maximum color depth up to 24-bit per interface
- maximum refresh rate up to 85Hz
- Supporting CRT and DFP interfaces:
- with simultaneous CRT/DFP capability
- DFP PanelLink® via front panel DVI-I connector
- CRT RGB via front panel DVI-I connector
- x1 PCI Express® fabric port:
- AMC.1 Type 1
- AMC.1 Type 1
- Support for a 2·5 inch hard disk drive:
- compliant to AMC.3 AdvancedMC specification for
storage
- compliant to AMC.3 AdvancedMC specification for
storage
- Independent Hot Plug Detect and DDC on DVI-I
- 512 Kbit Flash ROM for Video BIOS
- Hot swap compliant: - compliant to AMC.0
- IPMI (Intelligent Platform Management Interface):
- IPMI Version 1.5 according to AMC.0
- IPMI Version 1.5 according to AMC.0
- Extended temperature version available:
- -25°C to +70°C (E-Series)
- variants without hard disk drive only
- Supported by Windows® 2000, Windows® XP, Windows® XP
Embedded, Linux® and QNX®
- Supplied with a DVI-I to HD15 (VGA) adaptor
