row seperator


SW FSC/001 - Fabric Switch Configuration Software Tool

The SW FSC/001 Switch Configuration Tool is a software package which allows the user to configure and control several of the features of Concurrent Technologies Ethernet switch fabric board and PCI Express® switch fabric board products for VME, VXS, VPX and CompactPCI® architectures. It works in conjunction with the board’s standard operating firmware but runs on a host computer (which may be a single-board computer or a PC) that is connected to the switch board via a serial port. Alternatively, when the host computer board and the switch board are both in a CompactPCI backplane, the communication between the host computer and the switch board may be via the IPMB connection in the backplane. The Switch Configuration Tool will run on Microsoft® Windows® or Linux® operating systems. The tool uses a command line dialog for operator command entry.

Features

  • Remotely hosted software:
    • runs under Windows® XP, Windows® 7 and Windows® Server 2008
    • runs under RedHat Enterprise Linux®
    • level 2 switch management setup
  • Uses serial port or IPMB connection to fabric switch in remote chassis
  • Range of Ethernet Switch Fabric boards and PCI Express® Switch Fabric boards available for VME, VXS, VPX and CompactPCI
  • Command-line driven interface using plain text commands
  • Uses the switch board's non-volatile memory to save configuration settings
  • Supports a range of configuration and control commands, including:
    • switch setup and configuration display
    • hardware status display
    • VLAN setup and display
    • QoS configuration and display
  • PCI Express® configuration options include:
    • Transparent / Non-Transparent mode
    • PCI Express switch link/lane status
    • PCI Express switch register status
    • PCI Express switch statistics